Region EUROPE
    Version
    Model: HMW-605 T5 Soundproof J
    Model: HMW-605 T5 Open Skid K9

    Model

    HMW-605 T5

    HMW-605 T5 | Three phase | Diesel | Open Skid

    Model

    Powered by MTU

    Alternator STAMFORD

    PRP
    ESP
    COP
    Power kVA
    601
    660
    Power kW
    481
    528
    Generator set data sheet
    • Engine Specifications 1.500 r.p.m.
    • Rated Engine Output: 506kW prp ; 558kW standby
    • Manufacturer: MTU
    • Model: 12V1600G10F
    • Engine Type: 4-stroke diesel
    • Injection Type: Direct
    • Aspiration Type: Turbocharged and after-cooled
    • Number of cylinders and arrangement: 12-V
    • Bore and Stroke: 122 x 150 mm
    • Displacement: 21 L
    • Cooling System: Coolant
    • Lube Oil Specifications: S10 W40
    • Compression Ratio: 17,5
    • Fuel Consumption ESP: 128,6 l/h
    • Fuel Consumption 100% PRP: 116,99 l/h
    • Fuel Consumption 75 % PRP: 90,94 l/h
    • Fuel Consumption 50 % PRP: 63,06 l/h
    • Fuel Consumption 25 % PRP: 34,58 l/h
    • Lube oil consumption with full load: 0,5 % of fuel consumption
    • Total oil capacity including tubes, filters 72,5 L
    • Total coolant capacity: 99 L
    • Governor Type Electrical
    • Air Filter Type Dry
    • Inner diameter exhaust pipe: 106 mm
    • Diesel engine
    • 4-stroke cycle
    • 24V electrical system
    • Water separator filter (visible level)
    • Dry air filter
    • Radiator with pusher fan
    • Radiator water level sensor
    • HTW sender
    • LOP sender
    • Electronic governor
    • Hot parts protection
    • Moving parts protection
    • Generator: STAMFORD
    • Model: HCI544E
    • Poles: 4
    • Connection type (standard): Star-series
    • Mounting type: S-1 14"
    • Insulation: H class
    • Enclosure (according IEC-34-5): IP23
    • Exciter system: Self-excited, brushless
    • Voltage regulator: A.V.R. (Electronic)
    • Bracket type: Single bearing
    • Coupling system: Flexible disc
    • Coating type: Standard (Vacuum impregnation)
    • - OPEN SET VERSION.
    • Steel chassis
    • Emergency stop button
    • Anti-vibration shock absorbers
    • Chassis with integrated fuel tank
    • Fuel level gauge
    • Fuel tank drain plug
    • Steel industrial silencer -15db(A) attenuation
    • Fuel transfer pump (Optional)
    • Steel residential silencer -35db(A) attenuation. (Optional)
    • - ELECTRICAL SYSTEM.
    • Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
    • Battery Switch
    • Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
    • Battery charger (standard on gensets with automatic control panels)
    • Heating resistor (standard on sets with automatic control panels)
    • Battery charger alternator with ground connection
    • Starter battery/ies installed (cables and bracket included)
    • Ground connection electrical installation with connection ready for ground spike (not supplied)
    • - EXHAUST SYSTEM.
    • Maximum exhaust temperature: 482 ºC
    • Exhaust Gas Flow: 102 m3/min
    • Maximum allowed back pressure: 150 mbar
    • - NECESSARY AMOUNT OF AIR.
    • Intake air flow: 2880 m3/h
    • Cooling Air Flow: 11,2 m3/s
    • Alternator fan air flow: 1,035 m3/s
    • - STARTING SYSTEM.
    • Starting power: 8 kW
    • Starting power: 10,88 CV
    • Recommended battery: 75 x 2 Ah
    • Auxiliary Voltage: 24 Vdc
    • Starter current peak: 800 A
    • Nominal starter current: 250 A
    • - FUEL SYSTEM
    • Fuel Oil Specifications: Diesel
    • Fuel Tank: 740 L
    • - DIMENSIONS.
    • Length: 3.600 mm
    • Height: 2.121 mm
    • Width: 1.604 mm
    • Maximum shipping volume: 12,25 m3
    • Weight with liquids in radiator and sump: 4.529 kg
    • Fuel tank capacity: 740 L
    • Autonomy: 8 Hours

    Dimensions

    Dimensions
    Length (A)360141.73
    Width (B)160.463.15
    Height (C)212.183.50

    Weight

    Weight

    Weight with fluids in radiator and crankcase

    4529

    9986.445

    Fuel capacity

    740

    195.36

    Request a Quote

    Request a Quote

    By filling in this form you consent to have your information processed and recorded on our system and for the management of your relationship as a user, client, or candidate for employment Himoinsa.com.
    /privacy-policy/eng.html

     privacy policy *
    * Required fields
     

    Necessary

    Technical cookies are strictly necessary for our website to function and to be able to navigate through it. These types of cookies are those that, for example, allow us to identify you, give you access to certain restricted parts of the page if necessary, or remember different options or services already selected by you, such as your privacy preferences. Therefore, they are activated by default, your authorization is not required in this regard.

    Statistics

    The analysis cookies allow us to study the navigation of the users of our website in general (for example, which sections of the page are the most visited, which services are used the most and if they work correctly, etc.). Based on the statistical information on navigation on our website, we can improve both the operation of the page itself and the different services it offers. Therefore, these cookies do not have an advertising purpose, but only serve to make our website work better, adapting to our users in general. By activating them you will contribute to this continuous improvement.

    Marketing

    Marketing cookies are used to track visitors on web pages. The intention is to show ads relevant and attractive to the individual user, and therefore more valuable to publishers and third-party advertisers.