Generator set data sheet
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 1095,1kW prp ; 1168,1kW standby
- Manufacturer: YANMAR
- Model: AY40L.ET
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 12-V
- Bore and Stroke: 155 x 180 mm
- Displacement: 40,76 L
- Cooling System: Coolant
- Lube Oil Specifications: API CF or CH4, SAE 15W-40
- Compression Ratio: 14,35
- Fuel Consumption 100% PRP: 268,3 l/h
- Fuel Consumption 75 % PRP: 197,2 l/h
- Fuel Consumption 50 % PRP: 135,51 l/h
- Fuel Consumption 25 % PRP: 74,46 l/h
- Lube oil consumption with full load: 0,75
- Total oil capacity including tubes, filters 190 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 205 mm
- Oil temperature sensor
- Low coolant level sensor
- Exhaust gas compensator
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Standard air filter
- Standard fuel filter
- Standard oil filter
- Radiator with pusher fan
- Radiator water level sensor
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Water separator filter (visible level) (Optional)
- Generator: STAMFORD
- Model: PI734A
- Poles: 4
- Connection type (standard): Star
- Mounting type: S-00 21"
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - CONTAINER VERSION.
- Soundproofing provided by high-density volcanic rock wool
- High mechanical resistance
- Low level of noise emissions
- Door with window to visualize control panel, alarms and measurements
- Reinforced lifting points for crane hoisting and lower ones for transportation by forklift
- Residential steel silencer with -35dB attenuation and tilting cap in the exhaust
- Fuel tank integrated in the chassis
- Anti-vibration shock absorbers
- Steel chassis
- Manual oil extraction pump
- Robust construction designed for continuous or emergency applications
- Stainless steel fittings
- Emergency stops
- Easy access to the power connection
- Reinforced chassis for heavy range
- Easy access for chassis cleaning
- Silent-block with anti-corrosion protection between the genset and the chassis
- Easy access to fill radiator through the roof
- - ELECTRICAL SYSTEM CONTAINER.
- Control panel and emergency stop button
- Heating resistor
- Power panel
- Battery charger (standard on automatic control panels)
- Battery charge alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- Power panel with safety protection in output terminals box (open thermal magnetic protection and alarm)
- Maintenance-free and anti-explosion battery
- Battery isolator
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 465 ºC
- Exhaust Gas Flow: 241,8 m3/min
- Maximum allowed back pressure: 6 kPa
- Exhaust Flange Size (external diameter): 406,4 mm
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 5466 m3/h
- Cooling Air Flow: 26,4 m3/s
- Alternator fan air flow: 2,69 m3/s
- - STARTING SYSTEM.
- Starting power: 8 kW
- Starting power: 10,88 CV
- Recommended battery: 74 x 4 Ah
- Auxiliary Voltage: 24 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Fuel Tank: 999 L
- - DIMENSIONS.
- Length: 6.058 mm
- Height: 2.896 mm
- Width: 2.438 mm
- Maximum shipping volume: 42,77 m3
- Fuel tank capacity: 999 L
- Autonomy: 5 Hours
Length (A)605.8238.50
Width (B)243.895.98
Height (C)289.6114.02
Weight with fluids in radiator and crankcase
0
0
