Generator set data sheet
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 1165kW prp ; 1285kW standby
- Manufacturer: MITSUBISHI
- Model: S12R PTA2
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 12-V
- Bore and Stroke: 170 x 180 mm
- Displacement: 49,03 L
- Cooling System: Water
- Lube Oil Specifications: API CD or CF SAE 30 or SAE 40
- Compression Ratio: 13,5:1
- Fuel Consumption ESP: 310,91 l/h
- Fuel Consumption 100% PRP: 280,03 l/h
- Fuel Consumption 75 % PRP: 211,41 l/h
- Fuel Consumption 50 % PRP: 150,15 l/h
- Fuel Consumption 25 % PRP: 87,51 l/h
- Lube oil consumption with full load: 0,8
- Total oil capacity including tubes, filters 180 L
- Total coolant capacity: 305 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 304 mm
- Oil temperature sensor
- Low coolant level sensor
- Exhaust gas compensator
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Standard air filter
- Standard fuel filter
- Standard oil filter
- Radiator with pusher fan
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: STAMFORD
- Model: S6L1D.H4
- Poles: 4
- Connection type (standard): Star
- Mounting type: S-00 21"
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - CONTAINER VERSION.
- Soundproofing provided by high-density volcanic rock wool
- High mechanical resistance
- Low level of noise emissions
- Door with window to visualize control panel, alarms and measurements
- Reinforced lifting points for crane hoisting and lower ones for transportation by forklift
- Residential steel silencer with -35dB attenuation and tilting cap in the exhaust
- Fuel tank integrated in the chassis
- Anti-vibration shock absorbers
- Steel chassis
- Manual oil extraction pump
- Robust construction designed for continuous or emergency applications
- Stainless steel fittings
- Emergency stops
- Easy access to the power connection
- Reinforced chassis for heavy range
- Easy access for chassis cleaning
- Silent-block with anti-corrosion protection between the genset and the chassis
- Easy access to fill radiator through the roof
- - ELECTRICAL SYSTEM CONTAINER.
- Control panel and emergency stop button
- Power panel
- Battery charger (standard on automatic control panels)
- Water Jacket Heater with single phase pump
- Battery charge alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- Power panel with safety protection in output terminals box (open thermal magnetic protection and alarm)
- Maintenance-free and anti-explosion battery
- Battery isolator
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 520 ºC
- Exhaust Gas Flow: 279 m3/min
- Maximum allowed back pressure: 600 mm H2o
- Heat dissipated by exhaust pipe: 587,4 KCal/Kwh
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 6300 m3/h
- Cooling Air Flow: 30 m3/s
- Alternator fan air flow: 1,89 m3/s
- - STARTING SYSTEM.
- Starting power: 7,5 x 2 kW
- Starting power: 10,2 x 2 CV
- Recommended battery: 400 Ah
- Auxiliary Voltage: 24 Vdc
- Starter current peak: 1250 A
- Nominal starter current: 400 A
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Maximum power suction pump: 75 mm Hg
- Maximum return feed pump: 150 mm Hg
- Fuel Tank: 2.000 L
- - DIMENSIONS.
- Length: 12.192 mm
- Height: 2.896 mm
- Width: 2.438 mm
- Maximum shipping volume: 86,08 m3
- Weight with liquids in radiator and sump: 20.250 kg
- Dry weight: 19.787 kg
- Fuel tank capacity: 2.000 L
- Autonomy: 9 Hours
- Sound pressure level: 81 ± 2,4 dB(A)@7m
Length (A)1219.2480.00
Width (B)243.895.98
Height (C)289.6114.02
Weight with fluids in radiator and crankcase
20250
44651.25
