Generator set data sheet
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 71,9kW cop ; 89,9kW prp ; 98,9kW standby
- Manufacturer: FPT_IVECO
- Model: N45.TE2P
- Engine Type: 4-stroke diesel
- Injection Type: Direct, common rail
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 4-L
- Bore and Stroke: 104 x 132 mm
- Displacement: 4,5 L
- Cooling System: Coolant
- Lube Oil Specifications: SAE 15W40-CLASS T2; ACEA E7/04
- Compression Ratio: 17,5:1
- Fuel Consumption ESP: 24,2 l/h
- Fuel Consumption 100% PRP: 22,3 l/h
- Fuel Consumption 80 % PRP: 18,2 l/h
- Fuel Consumption 50 % PRP: 11,9 l/h
- Lube oil consumption with full load: 0,1 % of fuel consumption
- Total oil capacity including tubes, filters 12,8 L
- Total coolant capacity: 18,5 L
- Governor Type Electrical
- Air Filter Type Dry
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 12V electrical system
- Water separator filter (no visible level)
- Dry air filter
- Radiator with pusher fan
- Radiator water level sensor
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: STAMFORD
- Model: UCI224G
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-3 11"1/2
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - SOUNDPROOFED VERSION.
- Steel chassis
- Anti-leakage chassis, predisposed to retain liquids (retention tray)
- Manhole for fuel tank cleaning and drainage
- Manhole for chassis cleaning
- Oversized chassis to protect the bodywork
- Slide carriage and brackets for transportation with forklift
- Tilting cap in the exhaust
- Manhole to fill the radiator
- Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer
- Anti-vibration shock absorbers
- Chassis with integrated fuel tank
- Fuel level gauge
- Bodywork made from high quality steel plate
- High mechanical strength
- Low noise emissions level
- Soundproofing provided by high-density volcanic rock wool
- Epoxy polyester powder coating
- Full access for maintenance (water, oil and filters, no need to remove the canopy)
- Reinforced lifting hooks for crane hoisting
- Steel residential silencer -35db(A) attenuation.
- Oil sump extraction kit
- Versatility to assemble a high capacity chassis with a metallic fuel tank
- External filling of the fuel tank with safety key
- Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
- Mechanized for power cable output
- Door with window to visualize control panel, alarms and measurements
- Pressure locks
- IP Protection according to ISO 8528-13:2016
- 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
- Fuel transfer pump (Optional)
- - ELECTRICAL SYSTEM.
- M5 control panel with electronic CEM7 control unit and switched emergency stop
- Power panel with built-in circuit breaker plates
- Safety relay in output terminal board (thermal magnetic trip and alarm in control unit)
- Battery Switch
- M12 control panel with electronic DSE 7310 control unit and switched emergency stop
- Socket boxs IP67
- Adjustable earth leakage protection (time & sensitivity) standard in M12, with thermal magnetic protection
- Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- - EXHAUST SYSTEM.
- Maximum allowed back pressure: 10 kPa
- Heat dissipated by exhaust pipe: 608 KCal/Kwh
- - NECESSARY AMOUNT OF AIR.
- Alternator fan air flow: 0,216 m3/s
- - STARTING SYSTEM.
- Recommended battery: 44 Ah
- Auxiliary Voltage: 12 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Fuel Tank: 450 L
- - DIMENSIONS.
- Length: 3.360 mm
- Height: 1.997 mm
- Width: 1.250 mm
- Maximum shipping volume: 8,39 m3
- Weight with liquids in radiator and sump: 2.010 kg
- Fuel tank capacity: 450 L
- Autonomy: 25 Hours
- Sound pressure level: 60 ± 2,4 dB(A)@7m
Length (A)336132.28
Width (B)12549.21
Height (C)199.778.62
Weight with fluids in radiator and crankcase
2010
4432.05
