Generator set data sheet
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 2109kW prp ; 2330kW standby
- Manufacturer: MITSUBISHI
- Model: S16R2-PTAW2-E
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 16-V
- Bore and Stroke: 170 x 220 mm
- Displacement: 79,9 L
- Cooling System: Coolant
- Lube Oil Specifications: API CF, SAE 15W40
- Compression Ratio: 14,0:1
- Fuel Consumption ESP: 593,1 l/h
- Fuel Consumption 100% PRP: 533,8 l/h
- Fuel Consumption 75 % PRP: 394,5 l/h
- Fuel Consumption 50 % PRP: 268,2 l/h
- Fuel Consumption 25 % PRP: 142,7 l/h
- Total oil capacity including tubes, filters 290 L
- Total coolant capacity: 874 L
- Governor Type Electrical
- Air Filter Type Dry
- Oil temperature sensor
- Low coolant level sensor
- Exhaust gas compensator
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Standard air filter
- Standard fuel filter
- Standard oil filter
- Radiator with pusher fan
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: MECC ALTE
- Model: ECO46.VL4A
- Poles: 4
- Connection type (standard): Star - Parallel
- Mounting type: S-00 21"
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Double drive-shaft
- Coupling system: Elastic Coupling
- Coating type: Standard (Vacuum impregnation)
- - OPEN SET VERSION.
- Steel chassis
- Emergency stop button
- Oil sump extraction kit
- Anti-vibration shock absorbers
- - ELECTRICAL SYSTEM.
- Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
- Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
- Maintenance-free and anti-explosion battery
- Battery Switch
- Battery charger (standard on gensets with automatic control panels)
- Water Jacket Heater with single phase pump
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 511 ºC
- Exhaust Gas Flow: 562 m3/min
- Maximum allowed back pressure: 600 mm H2o
- Heat dissipated by exhaust pipe: 673,3 KCal/Kwh
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 12720 m3/h
- Cooling Air Flow: 41,5 m3/s
- Alternator fan air flow: 2,25 m3/s
- - STARTING SYSTEM.
- Starting power: 7,5 x 2 kW
- Starting power: 10,2 x 2 CV
- Auxiliary Voltage: 24 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Maximum power suction pump: 75 mm Hg
- Maximum return feed pump: 150 mm Hg
- - DIMENSIONS.
- Length: 6.510 mm
- Height: 3.540 mm
- Width: 2.300 mm
- Maximum shipping volume: 53 m3
- Weight with liquids in radiator and sump: 18.600 kg
Length (A)651256.30
Width (B)23090.55
Height (C)354139.37
Weight with fluids in radiator and crankcase
18600
41013