Generator set data sheet
BIM Object
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 506kW prp ; 558kW standby
- Manufacturer: MTU
- Model: 12V1600G10F
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 12-V
- Bore and Stroke: 122 x 150 mm
- Displacement: 21 L
- Cooling System: Coolant
- Lube Oil Specifications: S10 W40
- Compression Ratio: 17,5
- Fuel Consumption ESP: 128,6 l/h
- Fuel Consumption 100% PRP: 116,99 l/h
- Fuel Consumption 75 % PRP: 90,94 l/h
- Fuel Consumption 50 % PRP: 63,06 l/h
- Fuel Consumption 25 % PRP: 34,58 l/h
- Lube oil consumption with full load: 0,5 % of fuel consumption
- Total oil capacity including tubes, filters 72,5 L
- Total coolant capacity: 99 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 106 mm
- Diesel engine
- 4-stroke cycle
- 24V electrical system
- Water separator filter (visible level)
- Dry air filter
- Radiator with pusher fan
- Radiator water level sensor
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: MECC ALTE
- Model: ECO40 1.5L/4 B
- Poles: 4
- Connection type (standard): Star - Parallel
- Mounting type: S-1 14"
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - SOUNDPROOFED VERSION.
- Steel chassis
- Anti-vibration shock absorbers
- Chassis with integrated fuel tank
- Fuel level gauge
- External emergency stop switch
- Bodywork made from high quality steel plate
- High mechanical strength
- Low noise emissions level
- Soundproofing provided by high-density volcanic rock wool
- Epoxy polyester powder coating
- Full access for maintenance (water, oil and filters, no need to remove the canopy)
- Reinforced lifting hooks for crane hoisting
- Watertight chassis (acts as a double barrier against liquid retention)
- Fuel tank drain plug
- Chassis drain plug
- Steel residential silencer -35db(A) attenuation.
- Oil sump extraction kit
- Versatility to assemble a high capacity chassis with a metallic fuel tank
- IP Protection according to ISO 8528-13:2016
- Fuel transfer pump (Optional)
- - ELECTRICAL SYSTEM.
- Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
- Battery Switch
- Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
- Battery charger (standard on gensets with automatic control panels)
- Heating resistor (standard on sets with automatic control panels)
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 482 ºC
- Exhaust Gas Flow: 102 m3/min
- Maximum allowed back pressure: 150 mbar
- Exhaust Flange Size (external diameter): 200 mm
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 2880 m3/h
- Cooling Air Flow: 11,2 m3/s
- Alternator fan air flow: 0,9 m3/s
- - STARTING SYSTEM.
- Starting power: 8 kW
- Starting power: 10,88 CV
- Recommended battery: 75 x 2 Ah
- Auxiliary Voltage: 24 Vdc
- Starter current peak: 800 A
- Nominal starter current: 250 A
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Fuel Tank: 950 L
- Other fuel tank capacities: 2.380 L
- - DIMENSIONS.
- Length: 5.000 mm
- Height: 2.369 mm
- Width: 2.100 mm
- Maximum shipping volume: 24,87 m3
- Weight with liquids in radiator and sump: 6.739 kg
- Fuel tank capacity: 950 L
- Autonomy: 10 Hours
- Sound pressure level: 78 ± 2,4 dB(A)@7m
Length (A)500196.85
Width (B)21082.68
Height (C)236.993.27
Weight with fluids in radiator and crankcase
6739
14859.495
Length (A)500196.85
Width (B)21082.68
Height (C)271.4106.85
Weight with fluids in radiator and crankcase
7448
16422.84
