Generator set data sheet
BIM Object
- Engine Specifications 1.500 r.p.m.
- Rated Engine Output: 575kW prp ; 635kW standby
- Manufacturer: MITSUBISHI
- Model: S6R2 PTA
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 6-L
- Bore and Stroke: 170 x 220 mm
- Displacement: 29,96 L
- Cooling System: Water
- Lube Oil Specifications: API CD or CF SAE 30 or SAE 40
- Compression Ratio: 14,1:1
- Fuel Consumption ESP: 151,63 l/h
- Fuel Consumption 100% PRP: 136,4 l/h
- Fuel Consumption 75 % PRP: 104,34 l/h
- Fuel Consumption 50 % PRP: 74,56 l/h
- Fuel Consumption 25 % PRP: 44,1 l/h
- Lube oil consumption with full load: 0,8
- Total oil capacity including tubes, filters 94 L
- Total coolant capacity: 118 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 205 mm
- Oil temperature sensor
- Low coolant level sensor
- Exhaust gas compensator
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Standard air filter
- Standard fuel filter
- Standard oil filter
- Radiator with pusher fan
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: MECC ALTE
- Model: ECO40 2L/4 B
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-0 18''
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - SOUNDPROOFED VERSION.
- Steel chassis
- Anti-vibration shock absorbers
- Chassis with integrated fuel tank
- Fuel level gauge
- External emergency stop switch
- Bodywork made from high quality steel plate
- High mechanical strength
- Low noise emissions level
- Soundproofing provided by high-density volcanic rock wool
- Epoxy polyester powder coating
- Full access for maintenance (water, oil and filters, no need to remove the canopy)
- Reinforced lifting hooks for crane hoisting
- Chassis drain plug
- Steel residential silencer -35db(A) attenuation.
- Oil sump extraction kit
- - ELECTRICAL SYSTEM.
- Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
- Connection panel wired to the safety protection (open thermal magnetic protection and alarm)
- Maintenance-free and anti-explosion battery
- Battery Switch
- Battery charger (standard on gensets with automatic control panels)
- Water Jacket Heater with single phase pump
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 510 ºC
- Exhaust Gas Flow: 137 m3/min
- Maximum allowed back pressure: 600 mm H2o
- Exhaust Flange Size (external diameter): 200 mm
- Heat dissipated by exhaust pipe: 567,61 KCal/Kwh
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 3120 m3/h
- Cooling Air Flow: 12 m3/s
- Alternator fan air flow: 0,9 m3/s
- - STARTING SYSTEM.
- Starting power: 7,5 kW
- Starting power: 10,2 CV
- Recommended battery: 250 Ah
- Auxiliary Voltage: 24 Vdc
- Starter current peak: 700 A
- Nominal starter current: 370 A
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Maximum power suction pump: 75 mm Hg
- Maximum return feed pump: 150 mm Hg
- Fuel Tank: 950 L
- Other fuel tank capacities: 2.380 L
- - DIMENSIONS.
- Length: 5.000 mm
- Height: 2.369 mm
- Width: 2.100 mm
- Maximum shipping volume: 24,87 m3
- Weight with liquids in radiator and sump: 7.767 kg
- Fuel tank capacity: 950 L
- Autonomy: 9 Hours
- Sound pressure level: 92 ± 2,4 dB(A)@7m
Length (A)500196.85
Width (B)21082.68
Height (C)236.993.27
Weight with fluids in radiator and crankcase
7767
17126.235
Length (A)500196.85
Width (B)21082.68
Height (C)271.4106.85
Weight with fluids in radiator and crankcase
8476
18689.58
