Generator set data sheet
- Engine Specifications 1.800 r.p.m.
- Rated Engine Output: 608kW prp ; 668kW standby
- Manufacturer: MTU
- Model: 12V1600G20S
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 12-V
- Bore and Stroke: 122 x 150 mm
- Displacement: 21 L
- Cooling System: Coolant
- Lube Oil Specifications: S10 W40
- Compression Ratio: 17,5
- Fuel Consumption ESP: 149,9 l/h
- Fuel Consumption 100% PRP: 138,6 l/h
- Fuel Consumption 75 % PRP: 105 l/h
- Fuel Consumption 50 % PRP: 74,6 l/h
- Fuel Consumption 25 % PRP: 41,4 l/h
- Lube oil consumption with full load: 0,5 % of fuel consumption
- Total oil capacity including tubes, filters 72,5 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 106 mm
- EPA TIER 2
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Water separator filter (visible level)
- Dry air filter
- Remote radiator
- Radiator water level sensor
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: MECC ALTE
- Model: ECO40 1.5L/4 B
- Poles: 4
- Connection type (standard): Star - Parallel
- Mounting type: S-1 14"
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - CONTAINER VERSION.
- Soundproofing provided by high-density volcanic rock wool
- High mechanical resistance
- Low level of noise emissions
- System of interior lighting
- Door with window to visualize control panel, alarms and measurements
- Reinforced lifting points for crane hoisting and lower ones for transportation by forklift
- Residential steel silencer with -35dB attenuation and tilting cap in the exhaust
- Anti-vibration shock absorbers
- Steel chassis
- Manual oil extraction pump
- Robust construction designed for continuous or emergency applications
- Stainless steel fittings
- Emergency stops
- Easy access to the power connection
- Reinforced chassis for heavy range
- Easy access for chassis cleaning
- Silent-block with anti-corrosion protection between the genset and the chassis
- Easy access to fill radiator through the roof
- 50L tank for automatic oil replenishment
- 10-foot container
- External connection to fuel tank
- 3-way valve for external fuel supply (available in 1/2" and 3/8" fittings)
- - ELECTRICAL SYSTEM CONTAINER.
- Control panel and emergency stop button
- Battery charger
- Heating resistor
- Power panel
- Battery charge alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- Power panel with safety protection in output terminals box (open thermal magnetic protection and alarm)
- Maintenance-free and anti-explosion battery
- Battery isolator
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 425 ºC
- Exhaust Gas Flow: 132 m3/min
- Maximum allowed back pressure: 150 mbar
- Exhaust Flange Size (external diameter): 118 mm
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 54 m3/h
- Cooling Air Flow: 765 m3/s
- Alternator fan air flow: 1,08 m3/s
- - STARTING SYSTEM.
- Starting power: 8 kW
- Starting power: 10,88 CV
- Recommended battery: 75 x 2 Ah
- Auxiliary Voltage: 24 Vdc
- Starter current peak: 800 A
- Nominal starter current: 250 A
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Fuel Tank: 500 L
- - DIMENSIONS.
- Length: 2.991 mm
- Height: 2.591 mm
- Width: 2.438 mm
- Maximum shipping volume: 18,89 m3
- Weight with liquids in radiator and sump: 8.070 kg
- Fuel tank capacity: 500 L
- Autonomy: 5 Hours
- Sound pressure level: 73 ± 2,4 dB(A)@7m
Length (A)299.1117.76
Width (B)243.895.98
Height (C)259.1102.01
Weight with fluids in radiator and crankcase
8070
17794.35
