Generator set data sheet
- Engine Specifications 1.800 r.p.m.
- Rated Engine Output: 363,6kW prp ; 402,1kW standby
- Manufacturer: FPT_IVECO
- Model: C13TE3A
- Engine Type: 4-stroke diesel
- Injection Type: Direct
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 6-L
- Bore and Stroke: 135 x 150 mm
- Displacement: 12,9 L
- Cooling System: Liquid (water + 50% glycol)
- Lube Oil Specifications: ACEA E3 - E5
- Compression Ratio: 16,5 : 1
- Fuel Consumption ESP: 108,7 l/h
- Fuel Consumption 100% PRP: 98,1 l/h
- Fuel Consumption 80 % PRP: 82,5 l/h
- Fuel Consumption 50 % PRP: 55 l/h
- Lube oil consumption with full load: 0,5 % of fuel consumption
- Total oil capacity including tubes, filters 35 L
- Total coolant capacity: 68 L
- Governor Type Electrical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 108 mm
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Water separator filter (no visible level)
- Dry air filter
- Radiator with pusher fan
- Radiator water level sensor
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: STAMFORD
- Model: S4L1D.D41
- Poles: 4
- Connection type (standard): Star - Parallel
- Mounting type: S-1 14"
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - SOUNDPROOFED VERSION.
- Steel chassis
- Anti-leakage chassis, predisposed to retain liquids (retention tray)
- High capacity fuel tank, with contention base and easy external filling
- Manhole for fuel tank cleaning and drainage
- Manhole for chassis cleaning
- Oversized chassis to protect the bodywork
- Slide carriage and brackets for transportation with forklift
- Tilting cap in the exhaust
- Manhole to fill the radiator
- Pre-installation or niche to house the quick connection hydraulic fittings for fuel transfer
- Anti-vibration shock absorbers
- Chassis with integrated fuel tank
- Fuel level gauge
- Bodywork made from high quality steel plate
- High mechanical strength
- Low noise emissions level
- Soundproofing provided by high-density volcanic rock wool
- Epoxy polyester powder coating
- Full access for maintenance (water, oil and filters, no need to remove the canopy)
- Reinforced lifting hooks for crane hoisting
- Steel residential silencer -35db(A) attenuation.
- Oil sump extraction kit
- External filling of the fuel tank with safety key
- Emergency stop button (double emergency stop protection: Interior on the panel + Exterior on the bodywork)
- Mechanized for power cable output
- Door with window to visualize control panel, alarms and measurements
- Pressure locks
- IP Protection according to ISO 8528-13:2016
- 3 way valve for external fuel supply (available in 1/2" and 3/8" fittings) (Optional)
- Fuel transfer pump (Optional)
- - ELECTRICAL SYSTEM.
- M5 control panel with electronic CEM7 control unit and switched emergency stop
- Power panel with built-in circuit breaker plates
- Safety relay in output terminal board (thermal magnetic trip and alarm in control unit)
- Battery Switch
- Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 450 ºC
- Exhaust Gas Flow: 0,684 kg/s
- Maximum allowed back pressure: 5 kPa
- Exhaust Flange Size (external diameter): 140 mm
- Heat dissipated by exhaust pipe: 734 KCal/Kwh
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 1974 m3/h
- Cooling Air Flow: 8,5 m3/s
- Alternator fan air flow: 0,99 m3/s
- - STARTING SYSTEM.
- Starting power: 6 kW
- Starting power: 8,16 CV
- Recommended battery: 185 x 2 Ah
- Auxiliary Voltage: 24 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Fuel Tank: 1.660 L
- - DIMENSIONS.
- Length: 4.200 mm
- Height: 2.665 mm
- Width: 1.650 mm
- Maximum shipping volume: 18,47 m3
- Weight with liquids in radiator and sump: 4.909 kg
- Fuel tank capacity: 1.660 L
- Autonomy: 20 Hours
- Sound pressure level: 68 ± 2,4 dB(A)@7m
Length (A)420165.35
Width (B)16564.96
Height (C)266.5104.92
Weight with fluids in radiator and crankcase
4909
10824.345
