Generator set data sheet
- Engine Specifications 1.800 r.p.m.
- Rated Engine Output: 79,1kW prp ; 87,1kW standby
- Manufacturer: FPT_IVECO
- Model: NEF45SM3
- Engine Type: 4-stroke Miller Cycle
- Injection Type: Direct
- Aspiration Type: Turbocharged
- Number of cylinders and arrangement: 4-L
- Bore and Stroke: 104 x 132 mm
- Displacement: 4,5 L
- Cooling System: Liquid (water + 50% glycol)
- Lube Oil Specifications: ACEA E3 - E5
- Compression Ratio: 17,5:1
- Fuel Consumption ESP: 24 l/h
- Fuel Consumption 100% PRP: 21,6 l/h
- Fuel Consumption 80 % PRP: 15,4 l/h
- Fuel Consumption 50 % PRP: 10,9 l/h
- Total oil capacity including tubes, filters 12,8 L
- Total coolant capacity: 18,5 L
- Governor Type Mechanical
- Air Filter Type Dry
- Inner diameter exhaust pipe: 70,3 mm
- Diesel engine
- 4-stroke cycle
- Water-cooled
- 12V electrical system
- Dry air filter
- Radiator with pusher fan
- Mechanical governor
- Hot parts protection
- Moving parts protection
- Generator: STAMFORD
- Model: UCI224E
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-3 11"1/2
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - SOUNDPROOFED VERSION.
- Lower power cable outlet with aluminum cover
- Side auxiliary cable outlet with aluminum cover
- Modular tank and retention tray system. Allows easy removal and / or maintenance of the equipment
- Wide access to the engine compartment because of a removable door
- Fuel tank in retention tray
- Soundproofing with foam and polyurethane film
- Anti-vibration shock absorbers
- Fuel tank
- Fuel level gauge
- External emergency stop switch
- Bodywork made from high quality steel plate
- High mechanical strength
- Epoxy polyester powder coating
- Full access for maintenance (water, oil and filters, no need to remove the canopy)
- Versatility to assemble a high capacity chassis with a metallic fuel tank
- IP Protection according to ISO 8528-13:2016
- Manual oil extraction pump (Optional)
- Noise reduction kit (Optional)
- Fuel transfer pump (Optional)
- - ELECTRICAL SYSTEM.
- Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
- Adjustable earth leakage protection
- Battery charger (standard on gensets with automatic control panels)
- Heating resistor (standard on sets with automatic control panels)
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- Battery Switch (Optional)
- Optional Battery (Optima) (Optional)
- Leakage detector (Optional)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 510 ºC
- Maximum allowed back pressure: 6,5 kPa
- Heat dissipated by exhaust pipe: 780 KCal/Kwh
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 388 m3/h
- Cooling Air Flow: 2,4 m3/s
- Alternator fan air flow: 0,281 m3/s
- - STARTING SYSTEM.
- Starting power: 3 kW
- Starting power: 4,08 CV
- Recommended battery: 100 Ah
- Auxiliary Voltage: 12 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: Diesel
- Fuel Tank: 195 L
- Other fuel tank capacities: 405, 785 L
- - DIMENSIONS.
- Length: 2.600 mm
- Height: 1.500 mm
- Width: 910 mm
- Maximum shipping volume: 3,55 m3
- Weight with liquids in radiator and sump: 1.171 kg
- Fuel tank capacity: 195 L
- Autonomy: 13 Hours
- Sound pressure level: 70 ± 2,4 dB(A)@7m
- Sound pressure level with attenuation system: 68 ± 2,4 dB(A)@7m
Length (A)260102.36
Width (B)9135.83
Height (C)15059.06
Weight with fluids in radiator and crankcase
1171
2582.055
Length (A)260102.36
Width (B)9135.83
Height (C)16364.17
Weight with fluids in radiator and crankcase
1176
2593.08
Length (A)260102.36
Width (B)9135.83
Height (C)18572.83
Weight with fluids in radiator and crankcase
1330
2932.65
