Generator set data sheet
- Engine Specifications 1.800 r.p.m.
- Rated Engine Output: 356,8kW prp ; 428kW standby
- Manufacturer: PSI
- Model: 31.8L
- Engine Type: 4-stroke Otto Cycle
- Injection Type: Carburization
- Aspiration Type: Turbocharged and after-cooled
- Number of cylinders and arrangement: 12-V
- Bore and Stroke: 150 x 150 mm
- Displacement: 31,8 L
- Cooling System: Liquid (water + 50% glycol)
- Lube Oil Specifications: API SG/SH, SAE 10W30
- Compression Ratio: 10,5:1
- Fuel Consumption ESP: 1436 kW
- Fuel Consumption 100% PRP: 1436 kW
- Fuel Consumption 75 % PRP: 1096 kW
- Fuel Consumption 50 % PRP: 805 kW
- Fuel Consumption 25 % PRP: 578 kW
- Total oil capacity: 122 L
- Total coolant capacity: 176,2 L
- Governor Type Electrical
- Air Filter Type Dry
- LPG-liquefied petrol gas engine
- 4-stroke cycle
- Water-cooled
- 24V electrical system
- Dry air filter
- Radiator with pusher fan
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: MECC ALTE
- Model: ECO40 1S/4 B
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-0 18''
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Single bearing
- Coupling system: Flexible disc
- Coating type: Standard (Vacuum impregnation)
- - SOUNDPROOFED VERSION.
- Steel chassis
- Anti-vibration shock absorbers
- External emergency stop switch
- Bodywork made from high quality steel plate
- High mechanical strength
- Low noise emissions level
- Soundproofing provided by high-density volcanic rock wool
- Epoxy polyester powder coating
- Full access for maintenance (water, oil and filters, no need to remove the canopy)
- Reinforced lifting hooks for crane hoisting
- Watertight chassis (acts as a double barrier against liquid retention)
- Chassis drain plug
- Steel residential silencer -35db(A) attenuation.
- Oil sump extraction kit
- IP Protection according to ISO 8528-13:2016
- - GAS RAMP.
- Manual shut-off valve
- Gas filter
- Double solenoid valve
- High pressure regulator
- Primary pressure regulator
- Low pressure switch
- High pressure switch
- Valve (tightness) testing system
- Inlet pressure manometer
- Outlet pressure manometer
- Special Start/Stop sequence
- - ELECTRICAL SYSTEM.
- Electric control and power panel with measurements devices and control unit (according to necessity and configuration)
- Adjustable earth leakage protection (time & sensitivity) standard in M5 and AS5, with thermal magnetic protection
- Battery charger (standard on gensets with automatic control panels)
- Heating resistor (standard on sets with automatic control panels)
- Battery charger alternator with ground connection
- Starter battery/ies installed (cables and bracket included)
- Ground connection electrical installation with connection ready for ground spike (not supplied)
- Battery Switch (Optional)
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 653 ºC
- Exhaust Gas Flow: 97 m3/min
- Maximum allowed back pressure: 10,2 kPa
- Exhaust Flange Size (external diameter): 200 mm
- - NECESSARY AMOUNT OF AIR.
- Intake air flow: 1680 m3/h
- Cooling Air Flow: 30,72 m3/s
- Alternator fan air flow: 1,08 m3/s
- - STARTING SYSTEM.
- Starting power: 11,7 kW
- Starting power: 15,91 CV
- Auxiliary Voltage: 24 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: LPG
- Fuel Tank: 1.000 L
- - DIMENSIONS.
- Length: 5.960 mm
- Height: 2.860 mm
- Width: 2.620 mm
- Maximum shipping volume: 44,66 m3
- Weight with liquids in radiator and sump: 9.555 kg
- Fuel tank capacity: 1.000 L
- Autonomy: 1 Hours
Length (A)596234.65
Width (B)262103.15
Height (C)286112.60
Weight with fluids in radiator and crankcase
9555,00
21068.775
