Generator set data sheet
- Engine Specifications 1.800 r.p.m.
- Rated Engine Output: 350kW cop
- Manufacturer: SIEMENS
- Model: SGE18SM
- Engine Type: 4-stroke Otto Cycle
- Injection Type: Carburization
- Aspiration Type: Turbocharged
- Number of cylinders and arrangement: 6-L
- Bore and Stroke: 152 x 165 mm
- Displacement: 18 L
- Cooling System: Water + Antifreeze
- Lube Oil Specifications: SAE 40
- Compression Ratio: 9,2
- Fuel Consumption 100% PRP: 922 kW
- Fuel Consumption 80 % PRP: 759 kW
- Fuel Consumption 75 % PRP: 716,6 kW
- Fuel Consumption 50 % PRP: 522,8 kW
- Fuel Consumption 25 % PRP: 356,3 kW
- Lube oil consumption with full load: 0,35
- Total oil capacity: 86 L
- Governor Type Electrical
- Air Filter Type Semi-humid
- LPG-liquefied petrol gas engine
- 4-stroke cycle
- Water-cooled
- Radiator with pusher fan
- HTW sender
- LOP sender
- Electronic governor
- Hot parts protection
- Moving parts protection
- Generator: STAMFORD
- Model: S4L1S.F
- Poles: 4
- Connection type (standard): Star-series
- Mounting type: S-0 18''
- Insulation: H class
- Enclosure (according IEC-34-5): IP23
- Exciter system: Self-excited, brushless
- Voltage regulator: A.V.R. (Electronic)
- Bracket type: Double drive-shaft
- Coupling system: Elastic Coupling
- Coating type: Standard (Vacuum impregnation)
- - GAS RAMP.
- Manual shut-off valve
- Gas filter
- Double solenoid valve
- High pressure regulator
- Primary pressure regulator
- Low pressure switch
- High pressure switch
- Valve (tightness) testing system
- Inlet pressure manometer
- Outlet pressure manometer
- Special Start/Stop sequence
- - EXHAUST SYSTEM.
- Maximum exhaust temperature: 480 ºC
- Exhaust Gas Flow: 0,43 kg/s
- Maximum allowed back pressure: 450 mm H2o
- - NECESSARY AMOUNT OF AIR.
- Alternator fan air flow: 0,99 m3/s
- - STARTING SYSTEM.
- Auxiliary Voltage: 12 Vdc
- - FUEL SYSTEM
- Fuel Oil Specifications: LPG
Length (A)00.00
Width (B)00.00
Height (C)00.00
Weight with fluids in radiator and crankcase
0
0
